SE-21T
Particularly well-suited for sensor characterization of MEMS structures in climate chambers, the SE-21T offers powerful excitation in all axes thanks to its with cube-shaped ceramic armature and powerful electrodynamic drive system, very wide frequency range and low transverse motion. A high payload and the many extensions enable the SE-21T to be used as a multi-tool for testing, characterizing and calibrating vibration sensors or smaller electronic devices.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
Product details
Technical data
| SE-21T | |
| Force rating, max. (sine-peak) | 87.5 N 1) |
| Frequency range | DC … 50 kHz 3 Hz … 50 kHz with optional internal reference accelerometer |
| Acceleration, max. (sine-peak) | 350 m/s² 1) |
| Displacement, max. (peak-peak) | 10 mm |
| Transverse motion | typical < 5 % 2) |
| Payload, max. | 2 kg (vertical) / 1 kg (horizontal) |
| Temperature range (in operation) | -40 °C … +120 °C |
| Stray magnetic field on table | < 3 mT |
| Armature weight | 250 g |
| Weight (total) | 17 kg |
| Dimensions (H × W × L) | 164.5 mm × 270 mm × 270 mm |
All specifications are at room temperature unless otherwise specified. Technical data achieved with power amplifier PA 500 DM.
1) interval mode of operation
2) up to 35 kHz: single peaks up to 10 % / better than ISO 16063-11/21; up to 50 kHz: single peak more than 10 %
The basic version of the SE-21 has a limited temperature range, but features higher force and acceleration.
DUT mounting
- cube 30 mm / 1.2 in
- DUT mounting with adhesive
- thread patterns on request
Options and accessories
- suitable power amplifier PA 500 DM
- internal reference accelerometer including BNC cable
- set for active cooling
- readout set for the internal temperature sensor
- trunnion base for operation of the vibration exciter at a wide tilt angle range
- DUT mounting kit
For further details, please refer to the technical data sheet. Subject to change without notice.
Performance
The diagrams below show the performance of the SE-21 and SE-21T for operation alternating between 10 minutes at full load and 10 minute breaks (blue graph). Performance may vary for different cycles. The yellow graph shows acceleration values that can be safely used during continuous operation.
At 2 kHz, you can see a boost in the maximum acceleration. This is due to a new bearing design which minimizes transverse motion over the whole frequency range and reduces the moving mass above 2 kHz, thereby allowing for increased acceleration at equal force.
PA 500 DM
This specially designed power amplifier offers a max. frequency range DC...200 kHz, small harmonic distortion, excellent stability even with temperature or supply line variations and helpful protection functions.
For all vibration exciters that require a 500 VA power amplifier (load impedance 4 Ω).
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-2x Trunnion Base
Allows the vibration axis of the exciter (SE-20, SE-21 and SE-29) to be tilted and locked at any angle between 0° and 90° from the vertical axis.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
Large set of adapters
large set of adapters for sensor mounting (screwing and gluing)
including adapter plate
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
Similar products
SE-16
Rugged vibration exciter, specially developed for high frequency excitation of small components and sensors (longitudinal and transverse direction).
Devices under test (DUT) can be glued to the top or sides of the technical ceramic armature in any orientation to the main vibration axis.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-20
Innovative spring-guided vibration exciter with leading technology as part of the SE-2X exciter series.
The SE-20 offers a very wide frequency range, low transverse motion, a wide temperature range and high payload (e.g. for geophones). In addition to high quality components, the focus is on a broad range of applications and easy implementation in existing test environments. The shaker can be operated vertically and horizontally and requires no compressed air supply or zero-position control.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-20T
Our spring-guided vibration exciter features a very wide frequency range, low transverse motion, high payload (e.g. for geophones) and a wide temperature range.
The SE-20T is perfectly suited for use in climate chambers. In addition to high quality components, the focus is on a broad range of applications and easy implementation in existing test environments. The shaker can be operated vertically and horizontally and requires no compressed air supply or zero-position control.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-21
Powerful high-frequency exciter as part of the SE-2X series with cube-shaped ceramic armature for excitation of all DUT axes.
With its electrodynamic drive system, the SE-21 offers a very wide frequency range with low transverse motions. A high payload, simple operation in a climatic chamber (as SE-21T) and the many extensions enable the SE-21 to be used as a multi-tool for testing, characterizing and calibrating vibration sensors or smaller electronic devices.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-21T
Particularly well-suited for sensor characterization of MEMS structures in climate chambers, the SE-21T offers powerful excitation in all axes thanks to its with cube-shaped ceramic armature and powerful electrodynamic drive system, very wide frequency range and low transverse motion. A high payload and the many extensions enable the SE-21T to be used as a multi-tool for testing, characterizing and calibrating vibration sensors or smaller electronic devices.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-29
Innovative exciter with efficient electrodynamic drive as part of the SE-2X exciter series.
The SE-29 offers a very wide frequency range and low transverse motion. Thanks to the wide temperature range and the high payload, it is optimally suited for larger sensors or geophones. Besides high quality components, the focus lays on a versatile field of application and easy implementation into existing test environments.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-29T
This efficient exciter offers a very wide frequency range and low transverse motion.
The SE-29T is perfectly suited for use in climate chambers. Thanks to the wide temperature range and the high payload, it is optimally suited for larger sensors or geophones. Besides high quality components, the focus lays on a versatile field of application and easy implementation into existing test environments.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-09
Ideal for calibration laboratories, NMI (national metrology institutes) und MEMS tests – in frequencies up to 50 kHz and for devices up to 350 g. The SE-09 high-frequency vibration exciter with air bearings, specifically designed to meet the requirements of calibration laboratories and metrology institutes, as well as for the characterization of MEMS sensors.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more…
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components.
Primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-14
Spring-guided vibration exciter - suitable for daily use in the calibration laboratory as well as for vibration tests in a wide frequency range of 0 Hz…8 kHz.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
SE-101 RES-HA
Deliberately operated in resonance to generate harmonic acceleration-time signals with very high acceleration amplitudes. The exciter is deliberately operated in a certain resonance to cost-effectively generate harmonic acceleration-time signals with very high acceleration amplitudes with a compact 100 N drive. Main applications: amplitude linearity tests of sensors, vibration testing at high accelerations
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 113-AB
ELECTRO-SEIS® long stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 129
ELECTRO-SEIS® vibration exciter with mounting table for high payloads up to 23 kg and frequencies up to 200 Hz.
Especially developed for the calibration and testing of big and heavy low frequency sensors as well as for sensor characterization (e.g. geophones or heavy seismic sensors).
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 500
ELECTRO-SEIS® vibration exciter with mounting table for payloads up to 3 kg and frequencies up to 200 Hz.
Especially developed for the calibration and testing of compact low frequency sensors and for sensor characterization at higher acceleration.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 600
ELECTRO-SEIS® Long Stroke vibration exciter with mounting table for very high payloads up to 25 kg.
Especially developed for the calibration and testing of geophones and heavy seismic sensors.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 113
ELECTRO-SEIS® modal shaker specifically designed to be used alone or in arrays for modal excitation of complex structures, particularly at low frequencies.
Different operating modes with reaction masses, fixing points or auxiliary table kits multiply the application possibilities.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 400
ELECTRO-SEIS® modal shaker with 445 N max. force - suitable for excitation of large structures such as ceilings or bridges
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
APS 420
Our strongest ELECTRO-SEIS® modal shaker - maximum force of 900 N and up to 150 mm stroke
The APS 420 is used for vibration tests of airplanes and large structures. Its maximum force of 900 N and up to 150 mm stroke of the shaker unlocks new performance levels.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more…
CV-05
Highlights are the user-friendly interface, a high payload up to 300 g and the traceable DAkkS calibration certificate (corresponds to ILAC-MRA). The CV-05 is a mobile, battery-powered calibrator e.g. for on-site testing of human vibration measuring devices in accordance with ISO 8041.
APPLICATIONS
What are the SPEKTRA areas of application?
Learn more …
