CS
Options & Accessories

PR-Measurement
PR-Measurement
Signal conditioners and software for PR-sensors
PR signal conditioner power supply of piezo-resistive (bridge), variable capacitance and similar sensors used with the CS18 calibration system
chevron_right

Laser vibrometers
Laser vibrometers
Calibration of laser vibrometers
Optical components and software for calibration according to ISO 16063-41
chevron_right

SUPPLY internal
SUPPLY internal
Provides proper connection of several kinds of sensors to a voltage input of a measurement device (here: CS18 VCU). Sensor is plugged in at input. Signal output is connected to CS18 VCU input. Provides DC supply voltage(s) for sensor and performs signal preconditioning.
chevron_right

TRANS
TRANS
TRANS for CS18 VLF (primary and secondary)
Used for hardware and software to determine the cross-sensitivity of sensors
chevron_right

Accessories Case ZK-STD
Accessories Case ZK-STD
For the effective calibration of accelerometers in the laboratory, it is necessary to have an assortment of standard accessories. This assortment is supplied with the accessories case CS18 ZK.
chevron_right

Accessories Case ZK-HOP
Accessories Case ZK-HOP
For the effective calibration of shock sensors, it is necessary to have an assortment of standard accessories. This assortment will be supplied with the accessories case CS18 ZK-HOP.
chevron_right

APS 0109
APS 0109
The APS 0109 automatically controls the zero position of a vibration exciter irrespective of its load. It is essential to employ a position controller of type APS 0109 especially when working with an air-bearing vibration shaker without any integrated automatic load-compensation.
chevron_right

ATS-15
ATS-15
Part of electrical final test and calibration bench
chevron_right

CAL-Q-U-ICP
CAL-Q-U-ICP
Software extension for calibration of signal conditioners (payload-, IEPE-, measuring amplifiers)
In conjunction with the optional extra PHASE also applicable to PHASE calibration of signal conditioners
chevron_right

CV-10 PR
CV-10 PR
CV-10 Extension Module for PR Sensors
mobile check and calibration of piezo-resistive accelerometers - fast and reliable
chevron_right
In its standard configuration, every CS18 calibration system is optimized for a specific practical application. Its performance, however, can be extended by means of optional extras. On customer's demand, dedicated options can be compiled and offered with the system.