DT
APS 400
ELECTRO-SEIS® Long-Stroke vibration exciter with 445 N max. force that is suitable for excitation of large structures such as ceilings or bridges.
Downloads:
Product Video:
- Force, max.: 445 N (100 lbf)
- Displacement, max.: 158 mm (peak-peak)
- Frequency range: DC...200 Hz
- Overhung load at armature attachment point, max. 9.0 kg (20 lbs)
- Direction of excitation: vertical or horizontal
For detailed information see current data sheet. Subject to change without notice.
APS Auxiliary Table Kits
APS Auxiliary Table Kits
horizontal and vertical set-up
chevron_right
APS 145
APS 145
800 VA power amplifier for low-frequency vibration exciters
chevron_right
APS Reaction Mass
APS Reaction Mass
suitable to improve performance of several APS Shakers
chevron_right
APS Handles & Bars
APS Handles & Bars
Handles suitable for vibration exciter APS 113
chevron_right
Similar Products:
APS 113-AB
APS 113-AB
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
chevron_right
APS 129
APS 129
Air-bearing ELECTRO-SEIS® Long Stroke Vibration Exciter with mounting table for high payloads up to 23 kg. Especially developed for the calibration and testing of big and heavy low frequency sensors as well as for sensor characterization (e.g. geophones or heavy seismic sensors).
chevron_right
SE-13
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components,
primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
chevron_right
SE-09
SE-09
The air-bearing SE-09 high-frequency vibration exciter is a high-tech product developed especially for the high demands of calibration laboratories and metrology institutes as well as for characterization of MEMS sensors.
chevron_right