CS
APS 600
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter with mounting table for very high payloads. Especially developed for the calibration and testing of geophones and heavy seismic sensors.
Downloads:
Technical data
- Force, max.: 215 N (48 lbf)
- Displacement, max.: 400 mm (peak-peak)
- Frequency Range: DC...50 Hz
- Payload, max.: 25 kg (55 lbs)
- Load table size: 254 mm × 254 mm
Accessories (optional)
- Power amplifier
- Zero position controller
- System cables
For detailed information see current data sheet. Subject to change without notice.
PA 500 DM
PA 500 DM
For all vibration exciters that require a 500 VA power amplifier (load impedance 4 Ω). The PA 500 DM offers a max. frequency range DC...200 kHz, small harmonic distortion, excellent stability even with temperature or supply line variations and helpful protection functions.
chevron_right
APS 0109
APS 0109
The APS 0109 automatically controls the zero position of a vibration exciter irrespective of its load. It is essential to employ a position controller of type APS 0109 especially when working with an air-bearing vibration shaker without any integrated automatic load-compensation.
chevron_right
Similar Products:
SE-09
SE-09
The air-bearing SE-09 high-frequency vibration exciter is a high-tech product developed especially for the high demands of calibration laboratories and metrology institutes as well as for characterization of MEMS sensors.
chevron_right
APS 113-AB
APS 113-AB
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
chevron_right
SE-101 RES-HA
SE-101 RES-HA
The exciter is deliberately operated in a certain resonance to cost-effectively generate harmonic acceleration-time signals with very high acceleration amplitudes with a compact 100 N drive. Main applications: amplitude linearity tests of sensors, vibration testing at high accelerations
chevron_right
SE-13
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components,
primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
chevron_right