CS

CS Q-LEAP™ SINE with SE-09

bookmark_border
My Wishlist

The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-09 high frequency exciter. It allows calibration of a wide range of vibration transducers and vibration calibrators.

Downloads:

Key features

  • Frequency range: 5 Hz…20 kHz (… 50 kHz without traceability)
  • Traceable to PTB (German National Metrology Laboratory)
  • Calibration of vibration sensors, measurement systems and calibrators
  • Integrated sensor database
  • Integrated e-Cal™ software for the generation of calibration certificates (print, PDF...)
  • Easy data exchange with applications like ERP systems or measuring equipment databases

Technical data

  • Max. acceleration: 400 m/s² (40 gn) peak
  • Max. velocity: 0.5 m/s (19.7 inch/s)
  • Max. displacement: 7.5 mm (0.3 inch)
  • Max. payload: 350 g (12 oz)
  • Sensitivity of ref. accel.: 1 mV / m/s² (10 mV / gn)

CS Q-LEAP™ software

  • sine calibration
  • sine sweep
  • vibration measurement
  • vibration generation
  • more on demand

Typical DUTs

  • PE transducer
  • IEPE transducer
  • VC transducer
  • PR transducer
  • digital transducer with SPI, I2C, DTI, and many other interfaces
  • vibration meter
  • vibration calibrator

Standards

  • ISO 16063 - 21: Calibration of vibration transducers by comparison to a reference transducer
  • ISO 17025: General requirements for the competence of testing and calibration laboratories

For further details, please refer to the technical data sheet. Subject to change without notice.

Go back

Similar Products:

The calibration system CS Q-LEAP Sine from SPEKTRA with APS 129 shaker

CS Q-LEAP™ SINE with APS 129

CS Q-LEAP™ SINE with APS 129

The CS Q-LEAP™ system is based on the HERO™ vibration controller and the APS 129 air bearing vibration exciter. It allows calibration of heavy seismic sensors (seismometers) as well as geophones.

CS Q-LEAP™ vibration calibration system with APS 129 air bearing vibration exciter

chevron_right

The CS Q-LEAP SINE calibration system with SE-13 vibration exciter

CS Q-LEAP™ SINE with SE-13

CS Q-LEAP™ SINE with SE-13

The CS Q-LEAP™ system is based on the HERO™ vibration controller and the SE-13 air-bearing electrodynamic vibration exciter. It is used for seismic simulation and high-accuracy secondary calibration of seismometers and geophones.

CS Q-LEAP™ vibration calibration system with SE-13 air-bearing electrodynamic vibration exciter

chevron_right

CS Q-LEAP™ P-SINE with SE-13

CS Q-LEAP™ P-SINE with SE-13

CS Q-LEAP™ system is based on the HERO™ vibration controller, the laser vibrometer and the SE-13 air-bearing electrodynamic vibration exciter. For primary and secondary calibration at low frequencies, e.g. for seismometers and geophones.

CS Q-LEAP™ primary vibration calibration system with SE-13 air-bearing electrodynamic vibration exciter

chevron_right

The CS Q-LEAP P-SINE calibration system with SE-09 vibration exciter and laser vibrometer

CS Q-LEAP™ P-SINE with SE-09

CS Q-LEAP™ P-SINE with SE-09

The CS Q-LEAP™ system is used for primary vibration calibration of a wide range of sensors including vibration sensors and measurement systems. It is based on the   HERO™ vibration controller and the   SE-09   high-frequency vibration exciter.

CS Q-LEAP™ system for primary vibration calibration of vibration sensors and measurement systems

chevron_right