CS
SE-09
The air-bearing SE-09 high-frequency vibration exciter is a high-tech product developed especially for the high demands of calibration laboratories and metrology institutes as well as for characterization of MEMS sensors.
Downloads:
- Frequency range: DC ... 50 kHz (internal reference standard 5 Hz ... 50 kHz)
- Force, max.: 100 N (22.49 lbf)
- Acceleration, max.: 400 m/s2 (40 gn)
- Payload, max.: 350 g
- Displacement: 7.5 mm (peak-peak)
- Resonance frequency: > 52 kHz
- Dimensions: 156 mm × 240 mm × 240 mm / 6.1 in × 9.5 in × 9.5 in (H × W × L)
For further details, please refer to the technical data sheet. Subject to change without notice.
Similar Products:
APS 113-AB
APS 113-AB
Air-bearing ELECTRO-SEIS® Long Stroke vibration exciter, especially developed for the calibration and testing for low frequency sensors and sensor charcterization.
chevron_right
SE-13
SE-13
Air-bearing electrodynamic Vibration Exciter with mounting table for high payloads up to 50 kg. Especially developed for seismic simulation of components,
primary and secondary calibration as well as testing of big and heavy low frequency seismic sensors or geophones.
chevron_right
SE-101 RES-HA
SE-101 RES-HA
The exciter is deliberately operated in a certain resonance to cost-effectively generate harmonic acceleration-time signals with very high acceleration amplitudes with a compact 100 N drive. Main applications: amplitude linearity tests of sensors, vibration testing at high accelerations
chevron_right
APS 129
APS 129
Air-bearing ELECTRO-SEIS® Long Stroke Vibration Exciter with mounting table for high payloads up to 23 kg. Especially developed for the calibration and testing of big and heavy low frequency sensors as well as for sensor characterization (e.g. geophones or heavy seismic sensors).
chevron_right