Zero Position Controller for Vibration Exciters

Data Sheet

Optional extra for vibration calibration systems CS18 for the calibration of piezo-resistive sensors. Includes a PR signal conditioner power supply of piezoresistive (bridge), variable capacitance and similar sensors

Data Sheet

Optional extra CAL-Q-U-ICP is available for each of the CS18 calibration systems. This complementary set of hardware and software enables charge, voltage and ICP® amplifiers as well as microphone pre-amplifiers to be calibrated with respect to amplitude and phase.

Data_Sheet

All primary calibration systems by SPEKTRA include a laser vibrometer standard traced back to PTB and so are suited to the calibration of laser vibrometers and digital laser vibrometer standards.

  CS18P Primary Calibration Systems

Plug-in module for SPEKTRA CS18 calibration system to supply DC-voltage to sensors and for direct connection of sensors (e.g. VC types, ...)

Data Sheet

CS18 TRANS as an optional extra to a type CS18(P) VLF calibration system for determining the transversal transfer coefficient as a function of operating angle. It is intended for operation in conjunction with an APS 129 or APS 500 air bearing long stroke vibration exciter in the frequency range 2 Hz … 50 Hz.

Data Sheet

This case is containing all important accessories which you may need for the calibration of accelerometers of the most well-known manufacturers.

Data Sheet

This case is containing all important accessories which you may need for the calibration of shock accelerometers with the CS18(P) HS.

Data Sheet

The CS18 STAT is a special system for the calibration of inclinometers and static acceleration sensors.

• local gravitation : ± 1 g_n
• Adjustable tilt: 0° ... 360°