 |
||
 |
 |
|
|
 |
|
Home I Imprint I Contact I General standard terms and conditions |
|
Latest News
In response to the technical and economic changes of our dynamic era, this is where you are informed about new products and new services.
Easier and
more comfortable administration of Calibration data
After the successful graduating at the Dresden Technical University with a Dipl.-Ing. degree in engineering with specialization in applied mechanics Martin Iwanczik will join the SPEKTRA Team henceforth. The calibration exciter has been developed together with other colleagues for a dynamic calibration of accelerometers and force sensors to extend the efficiency by calibration services and CS 18 calibration systems. The Diploma thesis titled “Development of a resonator to calibrate accelerometers” would have been completed with excellent result.
In addition to factual information, our focus has been on fast and efficient navigation. For this reason we have completely
revised the layout and user interface and added a site presenting the latest topical news. Please do not hesitate to send us
your suggestions for further improvements.
The latest software version of the
CS18 FF system is based on the experiences from preparing our first accreditation
for acoustical quantities and accreditation extension to include sound level
meters. This software version is available as from now.
In addition to the rooms of the accredited calibration laboratory that have been air-conditioned from the very beginning, all other workrooms have now been furnished with air-conditioning, too, so as cope with the growing demands for quality assurance in the departments of incoming goods, manufacture and environmental simulation. Thus our experts in the development and sales departments and the office can keep cool also in extended summer periods with high temperatures outside.
When calibrating acceleration sensors, particular attention must be paid to the vibration exciter as an important component part of the calibration system. The quality of the SPEKTRA CS18 HF high frequency calibration systems could be further increased only by developing a suitable vibration exciter SE-09. The result by far outperforms all solutions that have been available so far.
The high-shock exciter can be used as a single component HOP or as a part of a complete CS18P HOP Primary or CS18 HOP Secondary Calibration System to calibrate shock sensors. Excellent reproducibility, automatic control and wide range of application up to 100.000 gN mark out this exciter.
"Sensitivity of acceleration sensors to magnetic fields", Dipl.-Ing. Michael
Suchanek.
The software package VCS201 for
sine, noise and shock has been reworked and further developed. Performance and reliability
have been improved and new options have been introduced. The update is free of charge for former customers.
After graduating at the Dresden Technical University with a Dipl.-Ing. degree in acoustics Andreas Kunadt has joined the SPEKTRA team. Being an acoustics engineer, he will further be the responsible expert for the extension of acoustical calibration services as well as the CS18 FF/SPL calibration system and engineering services for acoustical test systems. The Diploma thesis titled "Calibration of intensity and sound velocity probes in an acoustic free-field" will expand SPEKTRA calibration capabilities in the near future.
The compressed air supply system was renovated and expanded with the aim of meeting the demands of environmental tests and calibration runs using ThermoStream or ThermoJet. As a result, a central compressor can supply air at a rate of up to 10 litre per second to a ThermoStream or ThermoJet unit. Investigations into the temperature response of test objects are thus made possible in the range between -75°C and 225°C and with temperature gradients of up to 18 Kelvin/second. Compressed air that has been dried and cleaned is available for calibration tasks.
|
Our laboratory has been
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Engineering
News
Home I Imprint I Contact I General standard terms and conditions |
